Yes.You are going to need a broadcast TV antenna to use a converter box. There are many indoor antennas that you can choose from, but first, you need to make sure you can get a signal where you live.
How do I use ematic at103b?
Why is my converter box not working?
If you are having problems, check for loose or corroded wiring or broken antenna elements. Also check the direction the antenna is pointed. Try to keep the length of wire between your antenna and digital-to-analog converter box or digital television as short as possible for best reception.
How do you hook up a converter box and antenna?
Using the coaxial wire that comes with your Converter Box, plug one end into the “Out To TV (RF)” port on the Converter Box. Plug the other end into the “Antenna In (RF)” port on your TV. Plug the power cords on your Converter Box and TV into a power outlet, and turn on your TV and Converter Box.
Can I use a digital converter box as an antenna? – Related Questions
How do I hook up an analog TV antenna?
Can I connect cable and antenna to TV?
If your cable goes straight to the TV without a set-top box, attach it directly.Then take the antenna cable and attach it to the antenna input. If the Antenna In input is a regular coaxial connection like the cable connection, you can run a regular RG6 cable right from the antenna to the TV.Nov 20, 2018
What input should TV be on for antenna?
Connect your antenna coaxial cable to the “Antenna In” jack on the back of your digital tuner box. Use a second coaxial cable to connect the “Out to TV” on the digital tuner box to the “Antenna In” on the back of the TV. Set the TV to Channel 3 or 4 as indicated on the back of your digital tuning device.
Which switch is used for antenna and cable connection to TV?
Coax cable switches are usually used to switch between an antenna and another connection like cable or satellite. Each coax switch uses F-type connections, the same type of screw-on connection used on the back of televisions.
How do I get my TV to recognize my antenna?
You can set up your antenna during the initial setup of the TV, or set up over-the-air channels at any other time.
Here’s how to do it:
Go to the Source menu.
Connect your antenna.
Select the source.
Start scanning for channels.
Complete the setup.
Start watching live TV.
Why can’t I get an antenna signal?
Your cables may be loose.
If you have loose cables, you’ll most likely get no signal or a spotty signal. So make sure your connections are tight at your TV and your antenna. While you’re checking your connections, also take a look at your cables to make sure they aren’t bent, looped, or otherwise broken.
Why is my TV not finding any channels?
First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.
Why does my TV have no signal?
Check the cable connections between the TV and your video device or receiver. Change the channel or try a different input device or movie. The received signal may be weak. If your TV uses a cable or satellite box, you may need to contact your service provider for further assistance in improving the signal strength.
How do I get my antenna to work?
How do I test my TV signal?
How do I fix my TV signal?
Reset the box
Turn everything off at the wall.
Check that all cables are securely and firmly in place.
Wait for 60 seconds.
Plug your TV box (not the television set) in and turn it on.
Wait another 60 seconds, or until the lights on the TV box have stopped flashing.
Plug everything else back in and turn it all back on.
