How do I change the harddrive in my HP TouchSmart 520?

How do I change the harddrive in my HP TouchSmart 520? 

Can you upgrade a HP TouchSmart 520 PC? 

You can upgrade your HP TouchSmart 520-1050 Computer to up to a maximum memory capacity of 8GB Memory.

How do I change the harddrive in my HP TouchSmart? 

Lift the hard drive handle and slide the cage to the side. Then lift it up and remove it from the computer. Remove the four screws, two on each side of the hard drive cage. Save the screws for hard drive replacement.

How do I remove the harddrive from my HP TouchSmart PC? 

Removing the hard drive
  1. To remove the hard drive, first remove the rear cover.
  2. Loosen the captive Phillips screw that holds the hard drive in place.
  3. Lift the hard drive handle and slide the cage to the side.
  4. Remove the four screws, two on each side of the hard drive cage.
  5. Slide the hard drive out of the cage.

How do I change the harddrive in my HP TouchSmart 520? – Related Questions

How do I remove the stand from my HP Touchsmart 520?

How do I open my HP Touchsmart 600?

Pull firmly up at the bottom edge of the cover. Slide the cover down to remove it from the computer.

How much is a HP TouchSmart 600?

Now that Windows 7 has spurred almost every major desktop vendor toward multitouch, HP has the advantage of years of real market feedback to help refine the TouchSmart 600.

The Bottom Line.

HP TouchSmart 600 Gateway One ZX6810-01
Price $1,599 $1,399
Display size/resolution 23-inches, 1,920×1,080 23-inches, 1,920×1,080

How do I add RAM to my HP TouchSmart 600?

How do you open a HP TouchSmart 610?

Pull off the screw cover at the top edge of the cap. Remove the screw. Slide the left rear cap towards the middle of the computer. Pull off the cap.

How do I change the harddrive in my HP Touchsmart 610?

How do I open the back of my HP desktop?

How do I clean my all in one computer?

Turn off the computer and disconnect the power cable. Wipe the screen gently with a soft, dry cloth. If any marks remain, moisten the cloth with LCD cleaner, and then gently stroke the cloth across the display in one direction, moving from top to bottom.

How do I start my HP computer?

The power button is located on the lower right edge of the computer display. To turn on the computer, press and hold the power button until the HP logo appears on the screen.

How do I open my HP all in one computer?

How do I change the harddrive in my HP all-in-one?

How do I remove HP all-in-one stand?

How do I remove the harddrive from an HP all-in-one?

Removing the hard disk drive
  1. To remove the hard drive, first remove the rear cover.
  2. Loosen the captive screw for the hard drive.
  3. Grasp the hard drive handle and slide the hard drive to the side.
  4. Lift the drive and remove it from the computer.

How do I fix my HP hard drive failure?

Quick fix
  1. Hard reset your HP laptop to restore the default configurations.
  2. Reset the BIOS default settings and check if the error message still occurs after the system reboot.
  3. Run HP Hardware Diagnostics in quick mode or extensive mode.
  4. Test the hard drive with another computer, or reset the hard drive.

How do you destroy a hard drive?

  1. BEFORE YOU BEGIN.
  2. STEP 1: Remove the hard drive from your computer.
  3. STEP 2: Access the hard drive’s platters and circuit board.
  4. STEP 3: Remove the read/write arm, and scratch the platters with a screwdriver to destroy data.
  5. STEP 4: Break the circuit board.
  6. STEP 5: Recycle the computer’s components.

How do I replace my hard drive?

About This Article
  1. Back up your current drive.
  2. Make recovery media.
  3. Purchase the right hard drive.
  4. Shut the computer down and remove the case.
  5. Remove the hard drive.
  6. Insert the new drive and put the case back on.
  7. Boot the computer back up with the recovery media inserted.
  8. Reinstall Windows and restore from backup.

How much does a new hard drive cost?

The total cost of replacing a hard drive is about $200. This price includes the cost of the hard drive, which is between $60 and $100. It also takes about two hours of labor, for an average cost of $120. Hard drives are one of the most common and easiest components to replace on a desktop computer.