How do I fix the upside down camera on my Ford Edge?
There are two ways to go about it. First is the soft reset, in which you just press the reset button on the camera for 10 seconds. Next is a hard reset, which involves disconnecting the car battery.
How do I reset my Ford Edge backup camera?
Look in the area above the back windshield, and locate the camera. You should be able to find a button on the camera that is labeled “reset”. Now, press down this button and count for 10 to 20 seconds. At this point, the camera should reset, and now be back to its original factory settings.
How do I flip the image on my backup camera?
How to Reverse the Image on a Backup Camera
- Turn the monitor on with the “On/Off” button.
- Take a look at the image and determine if it matches the rear-view mirror, if it does, there is no further action for you to take.
- Press the “Orientation” button to toggle through the orientation options.
What is wrong with my backup camera?
If your backup camera display is flashing or giving you black and white static, it’s likely the case that you have a fraying wire or a faulty connection. Make sure all of the cables and connections in your backup camera system are fully connected and repair any damage.