How do I program my DIRECTV remote to turn my TV on and off?

How do I program my DIRECTV remote to turn my TV on and off? 

Why cant I turn my TV off with the remote? 

A remote control that will not respond or control your TV usually means low batteries. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.

Why won’t my DIRECTV remote turn off my Samsung TV? 

What you will need to do is move the slider to the TV position and try turning off the TV. If it still doesn’t work, make sure that you are able to use the other functions such as, volume, to see if it controls that. If that doesn’t work, then a reprogramming is in order.

Why won’t my TV turn on with my DIRECTV remote? 

Receiver and remote control reset

If the buttons on your remote are not responding, try resetting the receiver and remote control. On most DIRECTV receivers, there is a red button on the side of the receiver or inside the access card door. Press and hold the red button until the receiver restarts.

How do I program my DIRECTV remote to turn my TV on and off? – Related Questions

How do I resync my DIRECTV remote to my receiver?

Press and hold MUTE and SELECT until the light on the remote flashes twice. Then press 9 6 1 and press the CHANNEL UP button. Enter the last six digits of your receiver ID and press SELECT. (This is on a green sticker on the receiver or you can get it from your “My Equipment” page at

How do you reset a remote control?

For Android TVs released in 2015 or later, symptoms may improve by updating the software of the remote control.

Reset the remote control.

  1. Open the battery compartment cover and remove the batteries.
  2. Press and hold the Power button for three seconds.
  3. Insert the batteries again and close the battery compartment cover.

How do I reset my DIRECTV remote control?

Press and hold MUTE and SELECT together until the light flashes three times. Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.

How do I fix an unresponsive remote?

Section B: Checking items of the remote control (common)
  1. Make sure none of the remote buttons are jammed.
  2. Reset the remote.
  3. Clean the remote control terminals.
  4. Replace with fresh batteries.
  5. Perform a power reset on the TV.
  6. For Android TV/Google TV: symptoms may improve by updating the software of the remote control.

How do I unfreeze my TV remote?

Why won’t my TV turn on but red light is on?

Try unplugging the TV from the electrical outlet. While its unplugged, hold down the power button on the TV itself for about 30 seconds. Once that time is up, release the button and plug it back into power. Power the unit back up and see if you can see any imagery.

What do you do if your TV is stuck on one channel?

You might try this: Hit the Mute and Enter buttons at the same time. RF will show up on the screen and then hit OKAY. Might try: Hole the ENTER button and wait for the red light to flash 2 times and release. Then press the Enter button once.

How do you sync a remote to a TV?

  1. Open the Settings screen. How to access Settings. If the remote control has a Quick Settings button:
  2. The next steps will depend on your TV menu options: Select Remotes & Accessories — Remote control — Activate the MIC button or Connect via Bluetooth.
  3. Follow the on-screen instructions. Notes:

How do I find my TV code?

Find the code
  1. Open the YouTube app on your Smart TV or streaming device.
  2. Go to Settings .
  3. Scroll to Link with TV code. A blue TV code will show on your TV.
  4. Have your phone or tablet ready and continue with the steps in the “Enter the code” section below.

How do you program a TV remote without a code?

How to program a universal remote without a code
  1. Press the ‘Power’ button on the TV you would like to link to the remote.
  2. Press and hold down the ‘LED’ button until it lights up.
  3. On the remote press the ‘TV’ button.
  4. Press the ‘Power’ button while pointing towards the TV.
  5. Hold the position until the TV turns off.

How do I connect my remote to my set top box remote?

You can program the TV remote to enjoy the functionality of controlling your TV and Set Top Box(STB) simultaneously. Press and hold the STB button, then press the corresponding code while still holding the STB button. Release the STB button when done. – If successful, the STB button LED will turn RED and blink twice.

How do I turn off my TV and cable box at the same time?

Re: How to turn tv and digital box off together
  1. On the remote control, press and hold. SETUP.
  2. Enter. 9 – 9 – 5.The last-selected device key.
  3. For the first device you want in the. power on.
  4. Repeat step 3 up to four more times to add the.
  5. To save the settings and exit the program,press.

How do I connect my set-top box?

Enable Pairing on Your Set-top Box
  1. Press the Menu button on your remote control.
  2. Use the down arrow key to scroll to Settings, press OK.
  3. Use the down arrow key to scroll to Television.
  4. Press OK.
  5. Use the right arrow key to scroll to Second Screen Devices, press OK.
  6. Ensure that Allow Second Screen Devices is set to Yes.

What does the set top box needs to be paired means?

The most common reason for pairing error is due to recharging is not done over a long period so that the set-top box is deactivated. When the recharge is done mostly it will work or it shows “This is the wrong card for this set-top box (pairing error)” but you are using the same Digi card.

What is pairing error?

The pairing error in your Tata Sky Set-top-box may have occurred due to dust buildup on the chip of the Digi Card. So whenever you get such an error, the first thing which you should do is. Turn off the set-top box. remove the Digi Card and clean it with a soft cotton cloth.

How do I connect my iPhone to my set top box?

Plug a Lightning Digital AV Adapter or Lightning to VGA Adapter into the charging port on the bottom of iPhone. Connect an HDMI or VGA cable to your adapter. Connect the other end of your HDMI or VGA cable to your monitor, TV, or projector.

How can I connect my iPhone to my TV without WIFI?

The Apple Lightning Connector links your iPhone’s bottom port to an HDMI cable. Connect the device to your phone’s Lightning port, attach an HDMI cable to your TV, then plug the HDMI cable into the Lightning Connector, and your screen is instantly mirrored to your TV.