How do I update Klipsch RSB-11?

How do I update Klipsch RSB-11? 

RSB-11 – Firmware Update
  1. Download the latest firmware update file by going to and choose RSB-11 from the “AVAILABLE FIRMWARE UPDATES” drop-down menu.
  2. Look for the serial number range for your sound bar’s serial number (found on the back of the sound bar or subwoofer)

How do I update my Klipsch soundbar firmware? 

Firmware Installation
  1. Download the latest firmware update file by going to and choosing Bar 48 from the “AVAILABLE FIRMWARE UPDATES” drop-down menu.
  2. Enter in your soundbar’s serial number (found on the back of the soundbar or subwoofer)
  3. Download and save the file folder to your desktop.

How do I reset my Klipsch soundbar RSB-11? 

RSB-11 – Factory Reset
  1. Press and hold the [volume down] and [volume up] buttons at the same time until lights go out.
  2. The sound bar is now reset back to factory defaults.

How do you update Klipsch speakers? 

How do I update Klipsch RSB-11? – Related Questions

How do I connect my Klipsch RSB 11 to my TV?

RSB-11 – Reconnecting the Subwoofer
  1. On the back of the subwoofer, press and hold the “PAIR” button located directly above where the power cord is plugged in for 10 seconds.
  2. The LED light on the back of the subwoofer should begin flashing, indicating it is now in pairing mode.

How do I update Klipsch 5s firmware?

Insert the flash drive into the USB port labeled “SERVICE” on the back of the Fives. Re-connect the power cord to your Fives. Wait about two minutes while the update applies. During the update each input will flash and cycle through updates.

Is there an app for the Klipsch the fives?

To access this new feature, you will need to fully update your Fives speakers. This two-step process will walk you through first updating the product using a USB Flash Drive, and then finishing the update through the Klipsch The Fives Updater app, available for iOS and Android.

How do I use Klipsch Connect app?

  1. The App will prompt you to put the T5 II ANC into pairing mode by removing both headphones from the case and holding the action button for 3 seconds.
  2. Go into your device’s BT pairing menu and make sure Bluetooth is enabled.
  3. Search for devices and select Klipsch T5 ANC.
  4. Once successfully connected, tap ‘Continue’

How do I connect my Klipsch ProMedia 2.1 to my computer?

Promedia 2.1 BT – How to Connect via Bluetooth
  1. Begin by powering on your ProMedia 2.1 BT.
  2. Enable Bluetooth connection on your phone or computer.
  3. Once connected, start playing audio from the connected source device.

How do I connect my Klipsch speaker to my computer?

The Fives have the ability to connect to a PC or laptop through USB Audio and Analog/AUX. To play via USB, you will connect the included USB cable from the USB port on your laptop/PC to the USB Audio input on the back of The Fives. Set the source wheel on top of The Fives to USB.

How do I set up Klipsch THX?

How do I connect speakers to Windows 10?

On your PC, select Start > Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth. Choose the device and follow additional instructions if they appear, then select Done.

How do I enable speakers in Windows 11?

To enable an output device on Windows 11, use these steps:
  1. Open Settings.
  2. Click on System.
  3. Click the Sound page on the right side. Source: Windows Central.
  4. Under the “Output” section, click the Speakers setting. Source: Windows Central.
  5. Under the “General” section, click the Allow button for the “Audio” setting.

Why won’t my external speakers work on Windows 10?

Note if you don’t see the speakers in the device list, it may be disabled. In this case, right-click on the blank area and select Show disabled devices on the context menu. After it is listed, right-click on the speakers and click Enable. The problem also can be caused by outdated or missing audio drivers.

Why are my speakers not working Windows 10?

Check sound settings

Check to make sure your audio devices aren’t muted and haven’t been disabled. Right-click the Speakers icon on the taskbar, and then select Open Volume mixer. You’ll see a set of volume controls for your devices. Make sure none of them are muted.

How do I fix the sound after Windows 11 update?

Fix 1: Enable Enhance audio
  1. Press the Windows logo key + I (i) key together to open Settings.
  2. Go to System > Sound > All sound devices and choose your device.
  3. Scroll down to find Enhance audio. Turn Enhance audio on and then back off.
  4. Check your PC sound, it should be back to normal.

How do I update my audio drivers Windows 11?

First, you need to open Device Manager. For that, right-click on the Start button and select “Device Manager“. Step 2. Expand “Audio inputs and outputs“, then right-click on “Speaker/Headphone (Realtek (R) Audio” and select “Update Driver.”

How do I fix no sound on Windows 11?

How to Fix ‘No Sound’ Issue on Windows 11 (2022)
  1. Check Audio Muted/ Low Volume Levels.
  2. Choose the Right Audio Source.
  3. Connect the Audio Cable to the Correct Port.
  4. Make Sure the Playback Device Is Enabled.
  5. Adjust Windows 11 Sound Settings.
  6. Use Windows Audio Troubleshooter.
  7. Reinstall Audio Driver in Windows 11.

Can’t hear after Windows Update?

Why is there no sound after Windows 10 update? It’s likely that the new update causes conflicts with the sound card in your computer, or the update includes incompatible components with your sound card driver. Even the audio settings that are changed by the update can result in the issue.

Is there a Windows 11 coming out?

Microsoft confirmed Windows 11 would begin to rollout from October 5, 2021. This expands on a blog post by Panos Panay , the Chief Product Officer of Windows, which stated “Windows 11 will be available through a free upgrade for eligible Windows 10 PCs and on new PCs beginning this holiday.”

Can Windows 10 be updated to Windows 11?

How much does it cost to upgrade from Windows 10 to Windows 11? It’s free. But only Windows 10 PCs that are running the most current version of Windows 10 and meet the minimum hardware specifications will be able to upgrade. You can check to see if you have the latest updates for Windows 10 in Settings/Windows Update.