What is a .CAM File And How To Open It – Ucamco

Table of Contents

Introduction

Have you downloaded a file with .cam extension, but you have never seen this extension before? You most likely know what the file is, but you might be unsure on how to open it. Don’t worry! This article explains everything about the .cam file extension, how to open and work with it on various systems.

What is a .CAM file?

The file extension .CAM is from Gerber CAM Job File.The developer of this file extension is Ucamco. The file is a CAD software file.

What to know

There is currently 1 software that can open the .cam file on 1 platform.

How to open a .CAM file?

Below you can find an easy to understand, step-by-step guide to open the .CAM file on your operating system/device.

How to open a .CAM file on Windows (7, 8, 10)

Below you can see a visual guide on how to open the .cam file on Windows in 4 easy steps.

1. In the first step you need to download the Autodesk EAGLE software. You will be using this software in order to open the file.

Step 2

Step 2: Locating your .CAM file

2. The second step is locating the downloaded file. The file can be usually found in your /download/ folder if you don’t remember where you have downloaded it to.

Step 3

Step 3: Choose “Open with”

3. In the third step, after locating your file, right click on it and click “Open with”.

Step 4

Step 4: Choose the software and click ok

4. In the fourth step, after clicking “Open with”, you should see the Autodesk EAGLE software that you have downloaded. Choose your software and click on “OK”. Congratulations! You have opened your file on Windows.

Still cannot open the .CAM file?

If you cannot open the .CAM file, it is entirely possible that you are trying to open the wrong file. The .CAM file extension is similar to other file extensions such as: .cam – CASIO, .cam – FastCAM, .cam – Microsoft. You might be trying to open the wrong file, please recheck if you are trying to open the right file extension again.

Conclusion

In this article you have learned how to open the .CAM file with the Autodesk EAGLE program on Windows.