What cable do computer speakers use?

What cable do computer speakers use? 

To connect to the internal audio interface of the computer, we must locate an analog output. This, again, is typically the 3.5 mm headphone jack. Using a 3.5 mm male-to-male TRS cable, we can connect the computer to its speaker. Plug one end of the cable into the computer and the other end into the speaker.

What is a PC audio cable? 

A cable used to transfer analog or digital signals from an audio source to an amplifier or powered speaker.

Which computer jack is for speakers? 

Connecting speakers or headphones to a 3.5 mm mini jack

One of these wires should connect to the left speaker, and another should have a 3.5 mm mini plug that connects to your computer’s audio output jack. If your speakers require a power source to amplify the audio, there should also be a power cord.

How do I connect speaker wires to my computer? 

Connect the sound cable with black connectors into the Rear Speaker Out port on the back of the computer. Plug the other end of the cable into the black port on the subwoofer, next to the green port. Connect the sound cable with orange connectors into the orange Center or Digital Out port on the back of the computer.

What cable do computer speakers use? – Related Questions

Where do I plug speakers into my PC?

  1. Locate the sound card jacks on your computer.
  2. Plug one speaker into the other, if required.
  3. Plug the speaker cable into the green “Line-out” jack of a desktop computer.
  4. Plug the power cord from the speakers into an electrical socket and turn the speakers on.

Can you connect wired speakers to a computer?

As long as your laptop has a USB or speaker/headphone jack, you should be able to use most wired computer speakers. Most computer speakers have a 3.5mm (1/8″) audio input connector, which is the small plug that will fit into a typical headphone jack. These speakers will also need to be plugged into a power source.Aug 10, 2021

How do I connect old stereo speakers to my computer?

The easiest way to connect the audio output of your computer is to use the “line” output of your sound card. We recommend a stereo 3.5mm mini phone plug to dual RCA cable or mini plug to dual RCA jack adapter with a RCA jack stereo cable to go to the audio input of your sound system, such as the “aux” input.

How do you hook up old speakers?

  1. Strip off any old speaker wire that may be green or brown with corrosion. If the speaker wire ends have RCA jacks — and the new receiver doesn’t incorporate those — cut them off.
  2. Strip back the speaker wire approximately 1/2 inch.
  3. Twist the bare wire to prevent stray leads.
  4. Insert the bare wires into the post holes.