What cable does ATH-M50x use?

What cable does ATH-M50x use? 

1.2 m (3.9′) straight cable. Compatible with ATH-M40x, ATH-M50x, ATH-M60x and ATH-M70x headphones.

What type of cable does Audio-Technica use? 

This is a replacement cable for Audio-Technica M50X headphones. This black cable is coiled and has a length of 1.2m when not stretched to a maximum of 3m. Compatible with the ATH-M50X and also includes a 1/4” adaptor.

Features.

Category Headphones
Brand Audio Technica
Type of Accessory Cable

Does Ath M50xBT come with a cable? 

The ATH-M50xBT comes with a 1.2-meter cable with microphone and controls. This allows you to use the headphones when wireless operation is not available or when you run out of battery power.

How do you plug in ATH-M50x? 

What cable does ATH-M50x use? – Related Questions

What is the difference between ATH M50 and M50X?

Audio-Technica realized what was going on, and decided to give consumers a revision of the ATH-M50, that being the ATH-M50X. Basically, it’s the exact same headphone but with upgraded headband and ear pad materials, but most importantly, with detachable cables.

How do I connect Bluetooth to Audio-Technica?

Locate the Wireless Function Button and LED on the turntable. This button is used to activate the Bluetooth transmitter and to “pair” the turntable with other Bluetooth devices. The LED illuminates and changes color during the pairing process. Press the Wireless Function Button to begin the pairing process.

How do I connect my Audio Technica to my Marshall speaker?

Does the Audio Technica LP60 need speakers?

A: You’ll need speakers. It comes with RCA red and white outputs built in to make hooking up speakers easier. It also has a built in preamp, so you won’t need to purchase that.

Does Audio Technica have Bluetooth?

While this “older” technology does require a little more manual setup than the newer, digital tech, Audio-Technica has recently brought the best of these two worlds together by releasing a wireless version of our popular AT-LP60 turntable that includes an integrated Bluetooth wireless transmitter.

Is Audio Technica a good brand?

Is Audio Technica good? For those who are used to Sennheiser products, they can often look at other brands as inferior, and they could probably do with a bit more bass. However, Audio Technica is a good brand with a decent range of high quality headphones.

Can you connect Airpods to Audio Technica?

No, this unit cannot be paired with Airpods.

Does Audio Technica turntable need speakers?

Yes, you need speakers to connect to your turntable. The speakers are needed to project the sound. You can choose either passive or active/powered speakers. Passive speakers do not have a built-in amplifier and are powered by a separate amplifier, which you will need to provide.

Does the Audio-Technica LP60 need an amplifier?

With other turntables you may have to purchase a pre-amp separately, but the AT-LP60 has one built in. It’s a real plus as this makes for a hassle-free setup. As a result, you are able to connect directly to powered speakers without the need to purchase a separate preamp.

What is the difference between line and phono?

The primary difference between Phono and Line is that a Phono signal is much weaker than a Line signal. A Phono output signal needs the help of a preamp in order to properly amplify the sound. That’s why Phono level audio sounds much quieter. Line level is audio output that’s already been amplified.

Can you plug a turntable directly into speakers?

You can connect your turntable directly to speakers if the speakers are powered speakers. Powered speakers have the amplifier built in and don’t need a separate amplifier. Also, there must be a phono preamp built into the turntable or into the powered speakers.Feb 10, 2022

How do I connect audio Technica record player to speaker?

Connect the RCA (red and white) plugs from the turntable cable to the RCA (female) to 3.5 mm (1/8″) mini-plug (male) adapter cable, making sure to match red plug to red plug and white to white. Then connect the adapter cable’s 3.5 mm mini-plug to the powered speakers’ Line Level* input.

Does audio Technica LP60 have a preamp?

With its built-in switchable phono preamp, the AT-LP60 may be connected directly to your computer, home stereo, powered speakers and other components that have no dedicated turntable input.

What kind of amplifier do I need for a turntable?

A great amplifier for vinyl should have a built-in preamp and a phono input for versatility. This makes it possible to connect turntables without a preamp built in without the need for a separate preamp. Wireless Bluetooth is also a great feature to include.

Do I need an amplifier if my turntable has a preamp?

Yes. A turntable must be connected to an amplifier as the output signal is not strong enough to drive speakers. However, there is an exception as a lot of record players have pre-amplifiers built-in already.

Do I need a preamp and an amp for my turntable?

You will need a standalone preamp for your turntable if a preamp is not built into your turntable or amplifier/receiver. And even if a preamp is included in your turntable or amplifier, a popular option is to upgrade to a standalone preamp of higher quality than the built-in one to increase the sound quality.

How do you connect a turntable to an amplifier?

If there’s only a mini-jack input available on your amplifier or speaker, go for a mini-jack to 2x RCA cable. If your record player has a fixed RCA cable, get a mini-jack to 2x RCA female. An amplifier or speaker with two jack inputs requires a 2x jack to 2x RCA cable.