What kind of charger does Plantronics use?

What kind of charger does Plantronics use? 

The micro USB charge adapter allows you to recharge your Plantronics Voyager Legend headset from any micro USB charge cable. Tethered attachment allows you to keep the adapter secured to the charge cable of your choice. 24-inch USB-to-micro USB charge cable included.

How do I charge my Voyager? 

A micro USB cable is supplied to allow you to charge the headset with an AC wall charger (not included) or through a PC’s USB port. The PC must be powered on to charge via USB 2.0 or higher. Or you can use the charge case. (32°F) or above 40°C (104°F).

How do you charge a Plantronics Voyager Legend? 

Your new headset has enough power to pair and make a few calls before charging is needed, though you may charge at any time. 1 Align snap-fit magnetic areas of headset and USB cable. 2 Attach cable to USB wall charger or laptop for 90 minutes. LEDs turn off once fully charged.

How do you use a Plantronics charger? 

The headset can be charged with either the charging stand or with the USB charging cable. The light on the headset will flash red while charging and turn blue when fully charged. To use the charging stand, simply plug the AC power supply into a wall outlet and connect the other end to the bottom of the charging stand.

What kind of charger does Plantronics use? – Related Questions

How do I use my Plantronics Voyager?

How to Pair the Plantronics Voyager Legend Bluetooth Headset
  1. 1) Turn the headset on.
  2. 2) Turn on your phone’s Bluetooth feature.
  3. 3) Select Voyager Legend.
  4. 4) Complete pairing process.
  5. 1) Turn the headset on.
  6. 2) Using voice commands.
  7. 3) Turn on your phone’s Bluetooth feature.
  8. 4) Select Voyager Legend.

How long does it take Plantronics to charge?

It takes approximately 2 hours to fully charge your headset. While your headset is charging the indicator glows red. When your headset is fully charged, the indicator turns off. To Charge Your Headset: You can charge your headset by using the AC charger by itself or the desktop charging cradle with the AC charger.Dec 10, 2021

How can I tell if my Plantronics headset is charging?

To charge these headsets, simply slide them into the charging base and be sure that the amber light (on the left side of the base) begins flashing. When the amber light becomes solid, the headset is fully charged. If your headset does not turn on (no green light), then your battery has no charge.

How do I know if my Plantronics Voyager is charging?

Voyager 510 Indicator light flashes red while charging and turns solid blue when charged. It takes approximately 3 hours to fully charge. Explorer 220, 330, 340, and 350 Indicator light is solid red while charging and turns off when charged. It takes approximately 2 hours to fully charge.

How long does Plantronics battery last?

To learn how to replace the battery, click here. With a single full charge, the CS540 will provide up to 6 hours of talk time. Talk time will be reduced when operating in wideband mode or if the headset is used consistently at a far distance from the base.

Can you overcharge a Bluetooth headset?

Overcharging your wireless earbuds won’t affect the device in any way. There was a time when the majority of all electronic device batteries were nickel-based, and the lifespan of these batteries was reduced due to overcharging. Since most batteries are now lithium-ion, overcharging does not affect them.

How do I charge my Plantronics headset?

Charging Your Headphones or Bluetooth Adaptor
  1. Plug the AC charger into a power outlet.
  2. Connect the charger cable to the headphones or Bluetooth adaptor.
  3. Charge each for at least 1 hour before first time use, or 3 hours to fully charge. The LED indicator glows red while charging.

How do I change the battery in my Plantronics headset?

To replace the battery:
  1. Slide the battery cover off and remove it from the headset.
  2. Pull the battery out of the attachment clip.
  3. Grasp the battery connector and disconnect from the headset.
  4. Plug the new battery to the battery connector.
  5. Once connected, slide the battery into place.

Where is the battery on my Plantronics headset?

Located under the speaker of your Plantronics headset is a rubber flap you can peel back. Peel back this rubber flap and located in the headset is your battery. If you can’t use your finger, use a paperclip or pen to fish out the battery.

Why is my Plantronics headset not working?

Unplug the headset from the PC’s USB port and reboot the computer. Do not just restart – perform a complete system shutdown and then turn back on, as this will help clear the memory in the USB ports. Plug the headset directly into the PC and not into a hub or docking station.

How do I test my Plantronics battery?

Check the Battery Level in Between Calls:
  1. Tap the Voice Recognition button.
  2. After the “Say a command” voice prompt, say, “Check battery.”
Dec 10, 2021

Why is my Plantronics headset blinking red?

A flashing red light when charging can indicate a drained battery, we recommend you to connect to a different charger and fully charge the headphones. If the LED continues to flash red or if the headphones are not charging/powering on, please don’t hesitate to contact Plantronics Customer Care at 800-985-9815.

How do I check my Bluetooth headset battery?

Step 1: Pair and connect a Bluetooth device to your Android phone. Step 2: Open up the Settings app and go to “Connect Devices.” Step 3: Tap on the word “Bluetooth” (not the switch next to it) and you will see complete list of all connected devices and their battery level.

How do I mute Plantronics bt600?

To mute or unmute your headset, click the headset icon in the System Tray. To mute the device, click Mute. The headset icon turns red to indicate the device is muted.

Why does my poly Voyager headset keep muting?

Probable Causes: You could have exceeded the allocated power on your USB port, rendering the mute switch inactive. Possible Human Interface Device conflict or missing drivers.

Why does my Plantronics headset keep muting itself?

Usually, an internal or external microphone sets itself to mute automatically due to the incorrect sound settings. Even if you haven’t modified those settings, they might have been changed automatically after the installation of some updates or malware infection.

How do I turn off Plantronics bt600 mute?

Open Plantronics Hub. Click the Settings button in the upper right corner of the screen, and then click General. From the Mute Reminder drop-down list, choose either Audible Reminder if you want to hear the reminder whispered in your headset or Off if you want no reminders at all.