What should my DHCP settings be?
Since the default DHCP address range is between 100 and 149, you’ll want to avoid all of the addresses between 192.168. 1.100 and 192.168. 1.149 when you’re assigning static IP addresses. That leaves the ranges from 2-99 and from 150-254 wide open, which is usually plenty for most home networks.Aban 26, 1391 AP
Should DHCP be enabled?
DHCP is not enabled means your wireless access point is not running as a DHCP server, then it will not give an IP address, and you can’t access to the Internet. Note: In most home and small companies, your router acts as the DHCP server. So it’s recommended to enable DHCP.Esfand 16, 1400 AP
Is PPPoE better than DHCP?
Conclusion. There is not better than the other, they serve two entirely different functions, with zero overlap. Both PPPoE and DHCP are critical in connecting to the network, which works to acquire IP address.Mehr 7, 1400 AP
What is IPv4 and IPv6?
Share the Article: The Internet Protocol version 4 (IPv4) is a protocol for use on packet-switched Link Layer networks (e.g. Ethernet). IPv4 provides an addressing capability of approximately 4.3 billion addresses. The Internet Protocol version 6 (IPv6) is more advanced and has better features compared to IPv4.