Why does my stereo have power but no sound?

Why does my stereo have power but no sound? 

If your radio is lighting up and seems to function but you have no sound. The most common reason for no sound is speakers or speaker wires are grounded or shorted to a metal point. Speaker wiring cannot be wired together. Two speakers can not share the same connections.

How do you fix a radio that turns on but no sound? 

If your car radio turns on, but no sound comes out, common parts you should check include; blown fuses, Wiring shorts, Faulting input, or Damaged speakers/wires. It could also be a simple solution, such as the source or audio output device.

Why does my speaker turn on but no sound? 

It’s possible that your speaker is not connected correctly because of the hardware problems, so you’ll find your speakers are plugged but no sound at all. To rule it out as the cause for your problem, try troubleshooting: Ensure you’ve plugged your speaker into the correct speaker jack.

Why is my receiver not putting out sound? 

Make sure to turn on your receiver and all input devices. Connect the cables securely to the proper input and output terminals of your receiver, speakers, and input devices. Make sure the input devices are playing audio. Make sure the VOLUME or MASTER VOLUME knob of your AV Receiver is not set to VOL MIN.

Why does my stereo have power but no sound? – Related Questions

How do I know if my receiver is bad?

There are a few ways to tell if your receiver channel is blown. One way is to check the sound output from the speaker. If you can’t hear any sound at all, or if the sound is distorted, then it’s likely that the channel is blown. Another way to tell is to check the light indicator on the receiver.

How do you troubleshoot a sound system?

Follow this five-step process:
  1. Adjust the volume coming from the sound system.
  2. Check if the speakers are muted.
  3. Repair, replace, or connect any electrical wires.
  4. Inspect the system’s output device (smartphone, laptop, TV, entertainment system, etc.).
  5. Ensure you’re setting the speakers to the proper channel.

Why is my Onkyo receiver not playing sound?

Incorrect settings on your Onkyo receiver can result in no sound. The digital input signal should be set to “Auto.” Select the correct digital input source. Unplug headphones from the receiver when you are trying to use your system with the external speakers.

Why does my surround speakers not work?

Try different cables to verify this is not a bad set of cables. Try setting the Audio/Video (A/V) receiver to a different Surround Sound mode. IMPORTANT: Verify that the source you are playing is encoded with Surround Sound audio. If not, the audio will be very difficult to hear using a Surround Sound setting.

How do I get sound from my TV to my Yamaha receiver?

Connect the audio outputs jacks from the TV to any available audio input terminals on the Yamaha receiver, other than the phono input. You can use any analog audio Left (White) and Right (Red) inputs on your receiver such as the DTV/CBL, SAT or VCR input.

How do I get sound on my Yamaha receiver?

First, power off the AV Receiver/Sound Bar and TV, disconnect all the HDMI cables, and unplug the power cables. After five minutes, reconnect HDMI cables and power cables. Next, please check the following 3 points. Check the setting of HDMI Control on AV Receiver/Sound Bar.

How do I test my Yamaha receiver speakers?

RX-V573 Using the Speaker Test Tone
  1. Press the Setup Button.
  2. The On Screen Menu will pop up on your TV screen.
  3. Us the Arrow Up/Down buttons to navigate to Speaker.
  4. Press the Enter button.
  5. Configuration should be highlighted.
  6. Arrow Down to Test Tone.

How do I reset my Yamaha receiver?

What is PCM on my Yamaha receiver?

The PCM light on the front of the receiver lights up when the Yamaha unit is receiving a PCM signal from a source such as a DVD player. Standard PCM signals are 2-channel digital signals.

Should I use PCM or auto?

Registered. By setting HDMI audio output to AUTO, when playing a Standard DVD, the audio will be sent via Bitstream. If you watch an HD DVD, it will be sent via PCM. So AUTO is the best method for HDMI audio.

What is PCM sound mode?

PCM: This stands for “pulse-code modulation.” Use this setting if the external device you’ve connected to the HDMI port has already processed the sound, and you just want it to come out of your TV’s speakers. Note: This changes the signal to 2.0 PCM as it passes through the TV.

Which is better Dolby or PCM?

If the only thing you have is the television speakers for your entertainment, the PCM setting is the best option because it lacks compression. You’ll hear muted tones and less audio clarity when using the Dolby Digital setting with your stock setup.

Is PCM surround sound?

Yes, it is correct to say that PCM 5.1 is surround sound.

What is best connection for audio?

HDMI Cables:

The sound quality is better than other two cable types. These cables transmit multi-channel audio formats such as DTS:X and Dolby Atmos. The HDMI audio connection cables can also support current and new video formats such as Ultra HD 4K resolution, as well as HDR formats.

How do I change my PCM to Dolby Digital?

Setting sound for digital audio output
  1. Press the HOME button, then select [Settings].
  2. Select [Sound] → [Digital Audio Out] → [Auto] or [PCM]. Select [Auto] if the device connected via DIGITAL AUDIO OUT (OPTICAL) is compatible with Dolby Digital. Select [PCM] if the device is not compatible with Dolby Digital.

What is better PCM or DTS?

DTS has a higher bitrate and sounds technically better. …

Setting PCM or Bitstream settings does not influence the decision Dolby Digital Vs DTS Neo 2.5, because PCM and Bitstream are related to the HDMI input audio format.

What is PCM and passthrough?

ago. Additional comment actions. PCM is applicable to 2.1 stereo content. Pass thru means TV wont upmix/downmix signal and let the sound sys figure it out. This should make a diff if you expect 5.1/7.1/Atmos content to come out.