Why won’t my Panasonic TV turn on after power outage?

Why won’t my Panasonic TV turn on after power outage? 

Unplug the TV and then hold the power button depressed for something like a minute or two. After that plug the TV back in and connect only one input source, preferably a local source like DVD,BR, Game console etc. Then try to turn your TV on.

How do I reset my Panasonic TV that won’t turn on? 

Hard Reset

Step 1: Turn off your TV and any connected devices. Step 2: Unplug your TV from its power outlet. Step 3: Press and hold the power button on the back of the TV from 30 seconds. Step 4: Leave the TV unplugged for another 10 minutes.

How do I turn on my Panasonic TV after a power outage? 

Plug the TV’s power cable into a different electrical outlet, a different surge protector, or simply bypass the surge protector and plug the cord directly into an outlet. Again, try to power on the TV to see if this resolves the problem.

Why is my TV not turning on after power outage? 

Unplug Your TV and Perform a Power Drain

The first course of action you should try is a power drain cycle on your TV. Unplug your TV from the power source. Press and hold the power button for 10-30 seconds, this will drain all residual power from your TV. Now, reconnect the TV to the power source and try turning it on.

Why won’t my Panasonic TV turn on after power outage? – Related Questions

Why is my Panasonic TV not turning on?

Panasonic TV Troubleshooting No Power

The first thing to do when your Panasonic TV will not turn on from standby is to check your remote and the power plug. It could be something as simple as dead remote batteries. If you have your TV plugged into a power strip, rule that out as the culprit.

How do I reset my Panasonic TV?

  1. Press Menu on the remote.
  2. Press the “arrow down” and “arrow up” to select Setup then OK.
  3. Press the “arrow down” and “arrow up” to select System then OK.
  4. Press the “arrow down” and “arrow up” to select Factory Default then OK.
  5. Press the “arrow right” and “arrow left” to select Yes then OK.

Why is my Panasonic TV flashing red and not turning on?

What is this? The first thing to do when fixing a TV whose status lights are red is to check the power cable that comes to your TV. If the TV doesn’t receive enough power from your wall adapter, it won’t turn on properly, and hence cause the red light to start blinking.

How do I get my Panasonic TV out of safe mode?

To exit from Safe mode, press and hold the POWER button of the TV remote control until the a message Power off appears.

How do I turn off child lock on Panasonic TV?

Panasonic
  1. Press the MENU button on your remote control.
  2. Select Setup.
  3. Select Child Lock.
  4. Enter your Child Lock PIN (default PIN: 0-0-0-0)
  5. Select Parental Rating.
  6. Choose the rating you wish to block.
  7. Press RETURN on your remote control to go back to Live TV.

How do I unlock my Panasonic TV?

How to Unlock a Panasonic Viera
  1. Press the “Menu” button at the top of your remote.
  2. Use the downward arrow key to highlight “Lock.” Press the “OK” button the middle of the arrow keys.
  3. Enter your TV’s four-digit password using the number keys on your remote.

How do I turn off child lock on Panasonic TV without remote?

You can reset and eliminate the lock on some televisions without the remote, using a few tactics. Hold the power button for five seconds. The television will automatically restart. If the lock is still on, unplug the television and remove the battery from the back panel of the television.

How do I unlock my Panasonic Viera TV without a remote?

You can reset and unlock the lock on any TV without a remote using some tactics. Press and hold the power button for five seconds. The TV will restart automatically. If the latch is still in place, remove the TV and remove the battery from the back of the TV.

How do I reset my old Panasonic Viera TV?

To Reset by TV “MENU”

Press [Menu] on the television remote. Select “Setup” and press [OK]. Select “Reset to Defaults” and press [OK]. Enter in the four digit password, press [OK].

How do I reset my TV?

Power Reset

Unplug the AC power cord (mains lead). If the problem persists after step 1, unplug the TV power cord (mains lead) from the electrical outlet. Then press the power button on the TV and wait for 2 minutes, and plug the power cord (mains lead) back into the electrical outlet.

How do I fix my TV that wont turn on?

If the television still won’t turn on, turn your TV off at the wall and unplug it from the plug socket. Wait 30 seconds, and then plug it back in and switch it on. This is called a ‘soft reset’ and should recalibrate the TV.

Does unplugging TV reset it?

Disconnecting the TV from the power supply does not reset the TV, it just turns it off as if it were turned off and switched on via the remote control. If you want to perform a factory reset, you can usually do so via the configuration menu or a button located somewhere on the TV.

How come my TV won’t turn on?

Unplug the TV power cord (mains lead) from the electrical outlet for 30 seconds. Try connecting another electronic device on the same power switch and check whether you can use it to confirm the issue is not coming from your power outlet. Disconnect all external devices connected to the TV.

How do I know if my TV fuse is blown?

Depending on the make and model of your TV, use a screwdriver to unscrew the TV fuse cap holder. Then, carefully check the fuse wire. If you can see a visible gap between the wires or a visible metallic or dark smear inside the glass, you have a blown TV fuse.

How do I know if my TV is broken?

6 Signs That Your TV Needs to be Repaired
  1. Dead Pixels. Few things are as off-putting as a dead pixel in the middle of your screen.
  2. Colour Distortion. If the colours on your screen appear distorted, then your TV might be malfunctioning.
  3. Bars and Lines.
  4. Image Retention.
  5. Fuzzy Screen.
  6. Fading Screens.

How long should a TV last you?

The average lifespan of a television varies between 4 and 10 years (approximately 40,000 – 100,000 hours) depending on usage and maintenance. Turning off your TV is one of the simplest things you can do to extend its lifespan.

How do you know if your TV is fried?

Signs It’s Time for a New TV
  1. Your electricity bill is too high.
  2. It won’t work with your other gadgets and services.
  3. There are colored lines across your screen.
  4. Your TV screen is going out or fading.
  5. Your TV takes forever to start.
  6. You’re experiencing poor sound quality.
  7. You’ve got a case of TV screen burn-in.